04 528 4473 sales@upperhutthire.co.nz 20 Goodshed Road, Upper Hutt
 
  • Brush cutter Lawn mower Billy Goat scrub Upper Hutt Hire

    Brush cutter

    Min

    1/2 Day

    Day

    $50 $85 $110

     

     

    Our BILLY GOAT ® Self-Propelled Brush Cutter is designed for cutting overgrown weeds, brush and other growth down to 3½” (8.9 cm) in height. It is not a lawn mower and does not provide the quality cut of a finish cut mower, but it will reduce long grass and vegetation down to a manageable height.

     

    It is powered by a 13 HP 4-stroke Honda motor and will operate on a slope of up to maximum 20°. It weighs 126 kg and emits 93 dB(a) at the operators ear, so ear (and eye) protection are strongly recommended.

  • Chainsaw 12″ Makita (battery powered)

    Min

    1/2 Day

    Day

    $30 $40 $55

     

    Our Makita 12″ chain saw uses the latest in lithium-ion battery technology to provide effective chainsaw performance without the hassle of two-stroke petrol power. This unit run two 18VL-I batteries and has a power output equivalent to a 30 cc engine. It achieves 20 m/sec chain speed but with only 87.7 dB noise.

  • Chainsaw pole attachment extension upper hutt hire

    Chainsaw on Pole Attachment

    Min

    1/2 Day

    Day

    $15 $20 $25

     

    This unit is designed to be used with our Stihl Weedeater Multi-Purpose power unit. The Chainsaw attachment unit has a 280 mm long cutting area and a pole extension of 840 mm. This unit is ideal for trimming branches up to 100 mm diameter, especially when the branch is not able to be reached with a standard chainsaw.

  • Chipper 5″ Hansa 21HP

    Min

    1/2 Day

    Day

    $65

    ($56.52+GST)
    $105

    ($91.30+GST)
    $175

    ($152.17+GST)

     

    The Hansa C21 Chipper is a NZ built chipper suitable for dealing with logs and branches of 100 to 130 mm diameter, depending on the type of wood. The Chipper will process branch and brushy material and other vegetation material. The Hansa C21 has a large inlet chute for feeding in bigger bundles of brushy and twiggy materials and has a very efficient self feeding action. The inertia generated by the large rotor disk creates enough momentum to keep cutting as well as giving the machine enough draught to discharge the mulch up to 10m away. However it sure as hell won’t cut flax, so don’t and sneak some into it.

     

    Download the Hansa C21 Owners Manual (pdf 2MB)

     

    Download the Equipment Safety Data Sheet (ESDS) for this chipper here

     

    Download the Worksafe NZ 'Safe Use of Wood Chippers fact sheet here

     

     

  • Upper Hutt Hire C27HS hs Chipper shred shredder rent

    Chipper 6″ Hansa 27HP (Autofeed)

    Min

    1/2 Day

    Day

    $80

    ($69.57+GST)
    $115

    ($100+GST)
    $195

    ($169.57+GST)

     

    Our Hansa C27 Chipper is designed specifically for the Hire Industry, delivering great performance while weighing less than 750 kg (to meet towing restrictions). It will chip logs and branches of up to 150 mm diameter, and the auto-feed system removes the need to hand-feed branches into the feed chute, helping speed up the work.

     

    This New Zealand designed and built machine is powered by a 26HP Four stroke Honda petrol engine. The Hansa C27 Chipper is fitted with a mandatory feed roller control safety handle, and meets the requirements of the AS/NZS 4024.1:2014 standard.

     

     

    Download the Hansa C27hs Owners Manual (pdf 2MB)

     

    Download the Equipment Safety Data sheet (ESDS) for Chippers here

     

    Download the Worksafe NZ 'Safe Use of Wood Chippers fact sheet (pdf)

     

     

  • Cormidi motorised wheel barrow traced Upper Hutt HireMotorised tracked barrow bucket dump truck Upper Hutt Hire rent borrow equipment DIY Dirt removal move

    Cormidi 9HP Tracked Barrow

    Min

    1/2 Day

    Day

    $80

    ($69.57+GST)
    $115

    ($100+GST)
    $195

    ($169.57+GST)

     

    Our Cormidi Tracked Barrow makes moving virtually anything easier and quicker.

     

    The 0.25 m3 capacity barrow is built from heavy-gauge steel and will handle anything from dirt to concrete. The 9 HP petrol engine drives the rubber tracks over almost any terrain, with the recessed seating of the barrow lowering the center of gravity to provide better stability. The hydraulic lifting mechanism will lift the barrow (and its contents) up to 1.675 meters, making emptying into skip bins or trucks much easier.

     

    The Cormidi Tracked Barrow is only 700 mm wide, so will fit through most gates and down most pathways. Hire rates include a custom-built trailer.
     
    Call us now on 04 5284473 to make a booking.

  • echo hedge chainsaw trimmer pruner upper hutt hire

    Echo extended chainsaw hedge trimmer (3.7m)

    Main 25cc Echo Power Unit:

     

    Min

    1/2 Day

    Day

    $35 $45 $65

     

     

    Chainsaw OR Hedge trimmer attachment each:

     

    Min

    1/2 Day

    Day

    $15 $20 $25

     

    Our Echo combination Chainsaw pruner attachment or hedge trimmer attachment is ideal for extended work up to 3.7 meters high. The Echo two stroke motor provides 1.2HP while the entire unit weighs 8.4 kg.

  • hedge trimmer makita battery cordless Upper Hutt Hire Kennards kenards rent Hirepool pool borrow

    Hedge Trimmer (Cordless 650 mm)

    Min

    1/2 Day

    Day

    $30 $40 $50

     

    Our Makita cordless Hedge Trimmer is powered by 2 x 18v Lithium Ion batteries driving a 650 mm trimming blade.

     

    The entire unit weighs only 6.5kg, allowing for easier trimming at arms length. This unit features a two-hand safety handle. We supply two fully charged batteries with this hedge trimmer and a charging unit for hires longer than 4 hours.

  • Upper Hutt Hre - Husqvarna---Hedge-Trimmer

    Hedge Trimmer Husqvarna

    Min

    1/2 Day

    Day

    $30 $40 $60