04 528 4473 sales@upperhutthire.co.nz 20 Goodshed Road, Upper Hutt
 
  • Bomag roller steam compaction rent borrow hire Upper Hutt flatenBomag roller steam compactor road works roller compaction hire rent Upper Hutt

    Bomag 1.6MT twin vibrating roller

    2 hours

    4 hours

    8 hours

    $75

    ($65.22+GST)
    $138

    ($120+GST)
    $218.50

    ($190+GST)
    (Price includes trailer hire but does not include diesel)

     

    Our Bomag Light Articulated Steered Tandem Roller is ideal for compacting and asphalt applications, especially car parks, drive ways, footpaths, cycle paths and asphalt repairs.

     

    The roller weighs in at 1600 kg and is fitted with 900 mm wide rollers. The 3-cylinder 15KW diesel engine will power this machine up to an eye-watering speed of 10 km/hr.

     

    Both drums are fitted with on / off vibration capability, with the front drum able to provide 42hz vibration at 0.5 mm oscillation exerting 8KN force, while the rear drum will vibrate at 63 hz at 0.5 mm to give 17 KN force.

     

    Each drum has a pair of flexible rubber scrapping blades and the machine has a total water spray capacity of 100 litres to provide water to both drums. A purpose-built trailer is included in all hire rates.

     

    The controls are easy to operate, with a simple joy stick operation for forwards / backwards motion and inbuilt safety features including the auto cut-off switch on the seat.

     

    Compaction output (m3/hr) at recommended soil layer thickness:

    Gravel / Sand            70 – 120 m3/hr

    Mixed Soil                  45 – 90 m3/hr

    Silt / Clay                   35 – 70 m3/hr

     

    Compaction output (t/hr) at different asphalt layer thicknesses:

    2 – 4 cm                  15 – 30 t/hr

    6 – 8 cm                  30 – 50 t/hr

    10 – 14 cm              40 – 80 t/hr

     

    Call us now on 04 5284473 to make a booking.

     

    Download the Owners Manual for this Bomag roller (pdf 8MB)

     

  • concrete bull float upper hutt hire

    Bull Float & Telescopic Handle

    Min

    1/2 Day

    Day

    $15 $20 $30

     

    Our light-weight Bull Float with extension handle is great for spreading and levelling concrete. The Bull Float pole measures 150 mm x 1200 mm and is constructed of rigid alloy, providing a level surface without excess weight. With a unique release mechanism, a twist of the pole will break any suction and allow the bull float to be lifted from the wet concrete with minimal disruption to the surface. The telescopic handle measures 2.5 m but will extend to 4.6m. Ideal for initial concrete floating, especially for large jobs such as foundation pads.

  • Concrete Breaker / Demolition Hammer Large

    Min

    1/2 Day

    Day

    $45

    ($39.13+GST)
    $65

    ($56.52+GST)
    $95

    ($82.61+GST)

     

    Our Makita HM1810 heavy demolition hammer delivers 2.0 KW of grunt to knock over the toughest of jobs. This hammer is well suited to heavy demolition, especially where you can take advantage of its 32kg weight.

     

    It delivers 1100 blows per minute with kinetic vibration of 8 m/s2, and will fracture most forms of concrete. This unit produces up to 107 dB(A) so Class V hearing protection must be worn.

     

    Call us now on 04 5284473 to make a booking.

     

    Select either a point or chisel point (additional $12 per day).

     

    Click here for the Standard Operating Procedures for this Breaker (pdf)

     

    Click here for the Makita Owners Manual for this Breaker (pdf)
  • Upper Hutt Hire - Concrete Cutter Medium

    Concrete Breaker Medium

    Min

    1/2 Day

    Day

    $35

    ($30.43+GST)
    $50

    ($43.48+GST)
    $70

    ($60.87+GST)

     

    Our Makita HM1317 medium Demolition hammer is an ideal tool for general demolition and for breaking reinforced slabs, up to 100 mm depth. It delivers 730 – 1450 blows per minute and weighs a manageable 17 kg. The motor puts out a decent 1.5KW of power. The hammer also a fair bit of noise, so hearing protection must be worn.

     

    Select either a point or chisel point (additional $12 per day).

     

    Call us now on 04 5284473 to make a booking.

     

    Click here for Standard Operating Procedure for this Demolition Hammer

     

    Click here for the Makita Owners Manual

     

  • Upper Hutt Hire - Small Concrete Breaker

    Concrete Breaker Small Makita

    Min

    1/2 Day

    Day

    $30 $40 $55

     

    Our Makita HM0871C demolition hammer is ideal for demolishing concrete block construction, or where access is difficult. This tool is ergonomically designed to allow for demolition against the pull of gravity. The motor delivers 1.1KW of power and 1100 to 2650 blows per minute.

     

    Select either a point or chisel bit (additional $8 per day).

  • Upper HUtt Hire Rent Hirepool Kennards Kenards concrete saw

    Concrete Floor Saw 9HP

    Min

    1/2 Day

    Day

    $50

    ($43.48+GST)
    $75

    ($65.72+GST)
    $110

    ($95.65+GST)

     

    The Husqvarna FS309 Concrete Saw or floor cutter is a new addition to our portfolio. It is mounted on a wheeled chassis, designed to assist with making extended cuts in concrete. We chose this machine as it provides good stability for making straight-line cuts, yet only weighs 70kg, and can be easily transported in the back of a car or truck. It’s powered by a 9 Hp Petrol engine and has a 350mm diamond blade to give a maximum cutting depth of 120mm.

     

    Please note: This saw uses a commercial diamond blade, which wears according to the material cut and the time used. Each blade is measured prior to, and after hire, to determine the amount of blade used. Usage is charged accordingly, and is additional to the stated hire costs. A minimum blade fee of $20 (incl GST) applies.

     

    Call us now on 04 5284473 to make a booking.

     

    Click here for the Husqvarna brochure + specs for this machine

     

  • concrete cement mixer petrol trailer towable Upper Hutt Hire rent borrow

    Concrete Mixer Petrol Towable

    Min

    1/2 Day

    Day

    $30 $45 $60

     

    Our petrol-powered concrete mixer will get you mixing concrete in no time. The unit is powered by a reliable 4.5HP Subaru engine and is road registered, allowing you to mix concrete in remote locations.

  • Upper Hutt Hire - Concrete Saw

    Concrete Saw Petrol Stihl

    Min

    1/2 Day

    Day

    $45

    ($39.13+GST)
    $60

    ($52.17+GST)
    $90

    ($78.26+GST)

     

    Our Stihl 350mm concrete saw is ideal for cutting concrete above and below ground. The 350mm cutting wheels will cut to 125mm deep, with straight cuts made easy with the pivot legs. The two stroke 67cc motor puts out a healthy 4.4 HP. The saw weighs a manageable 9.6 kg, and has a hose attachment to reduce concrete dust and lubricate the blade.

     

    Please note: This saw uses a commercial diamond blade, which wears according to the material cut and the time used. Each blade is measured prior to, and after hire, to determine the amount of blade used. Usage is charged accordingly, and is additional to the stated hire costs. A minimum blade fee of $20 (incl GST) applies.

     

    We strongly recommend that all saws be run using the water attachment and that a breathing mask be worn to reduce the risk of silicosis. Contrary to popular belief, water does not stop all of the dust!

     

    Download the Equipment Safety Data Sheet (ESDS) for this Concrete Saw here.

     

    Please click here for Worksafe 'Cutoff' Saw safety information

     

    Download the Stihl Owners Manual for this 'Cutoff' Saw here.

     

     

     

     

  • Concrete electric vibrator

    Concrete Vibrator Electric Mikasa 32mm

    Min

    1/2 Day

    Day

    $30 $45 $60

     

    Our Electric Concrete Vibrator is ideal for displacing air pockets and ensuring your concrete foundations and footings are fully strengthened. The motor is a 2HP single phase motor with a strain relief screw electric connection to reduce the risk of power cord pullouts. This unit comes with a 4.6 m shaft and 35mm bulb that allows you to reach into concrete pours where access is a hassle. This unit is designed for slabs, driveways, stem walls, footings and complex foundation pours.

  • petrol concrete vibrator

    Concrete Vibrator Petrol Honda 43mm

    Min

    1/2 Day

    Day

    $35 $50 $70

     

    Our petrol driven Concrete Vibrator is ideal for displacing air pockets and ensuring your concrete foundations and footings are fully strengthened. The motor is a compact 3.5 HP Honda 4-stroke motor and the unit comes with a 1.0M flexible shaft with a 43 mm vibrator shaft. This lightweight unit is great where there is no electricity and mobility is important.

  • Cormidi motorised wheel barrow traced Upper Hutt HireMotorised tracked barrow bucket dump truck Upper Hutt Hire rent borrow equipment DIY Dirt removal move

    Cormidi 9HP Tracked Barrow

    Min

    1/2 Day

    Day

    $80

    ($69.57+GST)
    $115

    ($100+GST)
    $195

    ($169.57+GST)

     

    Our Cormidi Tracked Barrow makes moving virtually anything easier and quicker.

     

    The 0.25 m3 capacity barrow is built from heavy-gauge steel and will handle anything from dirt to concrete. The 9 HP petrol engine drives the rubber tracks over almost any terrain, with the recessed seating of the barrow lowering the center of gravity to provide better stability. The hydraulic lifting mechanism will lift the barrow (and its contents) up to 1.675 meters, making emptying into skip bins or trucks much easier.

     

    The Cormidi Tracked Barrow is only 700 mm wide, so will fit through most gates and down most pathways. Hire rates include a custom-built trailer.
     
    Call us now on 04 5284473 to make a booking.

  • Upper Hutt Hire - Drill

    Dyna Drill Makita

    Min

    1/2 Day

    Day

    $30 $45 $60

    Dyna Drill Makita

    Our 28 mm Makita Dyna drill (or Rotary Hammer) offers a combination of rotary hammering or drilling to get through concrete and other solid substances.  The 800 Watt motor has variable speed with reverse. It will drill concrete up to 80 mm (diamond tip bit), and steel up to 13 mm. At only 3.6 kg, it’s an easy tool to handle.

  • laser level spirit upper hutt hire rent borrow

    Laser Level

    Min

    1/2 Day

    Day

    $40 $60 $85

     

    Our rotating laser level is an ideal tool to determine accurate heights for general construction, especially when preparing excavations and boxing up foundations.

     

    This level includes a durable aluminium tripod, measuring staff and infra-red remote control. Upon start-up the device will self- level in both the horizontal and vertical planes, so there is no need to manually calibrate the level prior to use.

     

    The rotating head will emit a beam throughout 360° at up to 600 rpm and is equipped with a Tilt / High Impact warning light to guard against any sufficient ‘knocks’ that might affect the levels accuracy.

     

    It will operate for up to 50 hours on the rechargeable batteries and is accurate to within 3 mm over 30 meters.

     

    Click here for instruction Manual
  • pole float concrete upper hutt hire

    Pole Float & Telescopic Handle

    Min

    1/2 Day

    Day

    $15 $15 $20

     

    Our pole float with extension handle is great for spreading and levelling concrete, especially long narrow jobs where side-to-side levelling is required. The pole float measures 600 x 120 mm while the telescopic handle measures 2.5 m but will extend to 4.6m.

  • Upper Hutt Hire petrol powered concrete float

    Power Float 36″ Petrol

    Min

    1/2 Day

    Day

    $30 $50 $75

     

    Our petrol powered petrol float is ideal for trowelling and finishing large concrete areas, in order to achieve a smooth clean finish. This unit has four blades with variable pitch and a manual clutch for quick control.